A Paper slurry consisting of around 0.5-1.0% fiber, is pumped into a box where it flows out through a slot onto a moving wire belt.  Once on the polyester mesh the water is removed by draining and suction, leaving the fibers to form a very wet, and weak paper.  The paper is then pressed, heated, dried, resulting in a continuous roll or “web” which can be further finished as desired or required.

The forming section of the Fourdrinier constitutes what is called the wet end of the machine and is what the engineer perfected.  This section consists of the head box, the polyester mesh, foils, suction boxes, couch roller, breast roller and dandy roll.

The pulp flowing onto the polyester forming fabric is approximately 0.5-1.0% fibers, with the make-up consisting of water.  As the water is removed from the slurry, the fibers settle onto the surface of a traveling wire, forming a wet mat of paper.  Therefore, the main objective of the forming section is the controlled removal of water. 

Coco Qin

Sales Department
Hebei Defeng Polyester Fiber Co., Ltd
Add: Wugong Town West Raoyang County Hebei Province China
TEL: 0086-311-67699480
FAX: 0086-311-67699480
EAMIL: coco@china-polyestermesh.com 
Website: www.china-polyestermesh.com

Tag:Polyester Mesh, Polyester Forming Fabric